Phone
0750-3680568
Steps to replace the valve core of the faucet
The faucet is used frequently. Once the faucet leaks, it will not only waste water resources, but the sound of water droplets and the long-term impact on the humidity of the space will affect the health of the family. At this time, it is necessary to see if there is a problem with the spool of the faucet. In fact, the spool of the faucet can also be replaced by yourself. Next, the faucet manufacturer Andy Sanitary Ware will introduce the replacement steps of the faucet valve core in detail.
1. Preparation
If the spool is broken, we need to buy one to replace it. The new spool must match your faucet. Under normal circumstances, which brand of faucet you buy, you can buy the spool in the store of this brand, and you can basically buy it. Prepare a flat-head or Phillips screwdriver, or Allen wrench, according to the screws of your own faucet, a pair of needle-nose pliers, and a knife.
Faucet manufacturers
2. Remove the hot and cold water buttons
Before replacing the spool, find the water source switch of the faucet, and then turn it off to avoid spraying water when replacing it. Then find the Leng Ranshui button or the plastic cap, and gently pry it off with a small blade so that you can see the screws inside.
3. Remove the handle
After turning on the hot and cold water buttons, look at the shape of the screw, whether it is a flat or cross-shaped screw, or a hexagonal screw, and then decide which screwdriver or Allen wrench to use. Remove the screw in the hole with a screwdriver, and then the handle of the faucet can be removed.
4. Unloading the spool
After removing the handle, you can see the inner spool. Some spools have a fixed shell cover. Just remove the cover. Then you can see the clamp that fixes the spool. There are generally four claws on the clamp. Use needle-nose pliers to clamp the two claws, and then rotate clockwise to remove the clamp.
5. Installation
After removing the clip, you can remove the broken valve core, and then install the new valve core, reverse the previous steps, reinstall the other components, install the faucet handle, and punch the card. Water source valve, try to see if there is water leakage, lock the handle when there is no problem, and install the cold and hot water plastic cap.
Through the above introduction, I believe that everyone knows the steps of replacing the valve core of the faucet. The stainless steel faucet manufacturer Diliqi Sanitary Ware takes "art from life" as its brand concept, and aims to create a high-quality bathroom life for customers that is synchronized with the world. . Diliqi people have strict standard requirements for products, and are the first to implement ISO9001:2008 quality management system standards. Products have passed European EN817, European CE, French ACS, British WRAS, North American CUPC, Canadian CASS and other certifications.
Diliqi insists on design innovation. Prioritize quality, create unique styles of sanitary products and lifestyle trends, add simplicity, luxury, fashion and other design elements to bring customers a good bathroom life enjoyment, which is worthy of your trust.
Part of the content of this article has been compiled from the network and shared. If there is any infringement, please contact the editor to delete it.
